The AMC-5810 is an Ethernet to serial RS-232/422/485 converter. The device provides Ethernet communication with 10/100Mbps, the serial interface RS-232/422/485 configuration with webpage management and the DIP switch for position terminator or biasing resistor on theRS-485/422 communication network, the digital input (DI) and digital output (DO) channels for logic control or event trigger.


  • Ethernet 10/100Base-TX transmission
  • RS-232/422/485 speed up to 230.4 Kbps
  • 15KV ESD protection for all RS-232/422/485 signals
  • 2.5KV isolation between device and RS-232/422/485 interface
  • Supports terminator and biasing resistor via DIP switch
  • Supports 3-channel DI and 3-channel DO for event trigger
  • Supports ARP, TCP/IP, ICMP, DHCP, HTTP, Telnet, and SMTP
  • Built-in webpage remote management for serial operation mode setting, DI/DO situation, and firmware upgrade
  • Din-Rail mount or wall mount robust housing
  • Operating temperature (0 to 70°C)

Ethernet and Webpage

The AMC-5810 provides Ethernet 10/100Mbps communication and 1.5 KV isolated protection. The user can use standard or cross over cable to plug in RJ45 connector. It also supports TCP/IP, ARP, ICMP, HTTP, and Telnet protocols. The webpage provides serial RS-232/42/485 2-wire/485 4-wire mode, getting DI status, setting DO state, and firmware upgrade.

Isolation and ESD protection

The AMC-5810 offers 2.5KV isolation protection between device and RS-232/422/485 interface. It also has 15KV ESD protection on all RS-232/422/485 signals.

Serial mode, Terminator and Biasing functions

The AMC-5810 serial converter supports RS-232, RS-422, half-duplex 2-wire RS-485 and full-duplex 4-wire RS-485 modes selection, it is easy to use in the serial multi-drop networking application. There are terminators and biasing resister for tuning networking characteristics.

DI and DO channel

The AMC-5810 has 3-channel digital input (DI) and 3-channel digital output (DO). All of DO channels are sink-type and provide 150mA sink current, and have overcurrent protection. All of DI and DO channels have 2.5KV isolation and ESD protection.

Wide operating temperature

For most of industrial applications are harsh environment, The AMC-5810 provided the operating temperature from 0 to 70°C, give you a reliable solution of a Ethernet to RS-232/422/485 converter for wide temperature application.

Wall-mount or Din-Rail solution

The AMC-5810 provides wall-mount and DIN-Rail installation solutions; allow you easily screw it by wall mount screws or mount it on the DIN-Rail by DIN rail mount kit.




Industrial RS-232 to RS-422/485 Converter



Industrial USB to 2-Port RS-232 Converter



Industrial USB to 2-Port RS-422/485 Converter



Ethernet to Serial Media Converter




Industrial Serial RS-232/422/485 to Fiber Media Converter