Support 3.3V to 1.2V flash memory chip in VCC and I/O without low voltage converter.

Flash chip support up to 128G bit.

Extremely high speed: it blank check a 64M bit flash chip in 1.6 seconds, program the STM28W640CT (4 word programming algorithm) within 11.5 seconds, verify within 3.2 seconds.

USB interface: support USB 1.1 or 2.0

One PC can connect up to 16 unit Labtool-T400 to perform Asynchronous programming

Device insertion /continuity check before programming.

Target quantity and Max failure rate alarm.

Supports Windows 98SE/ME, Windows 2000 and windows XP

USB or parallel port interface with auto-switch power

Support 5V and 3.3V low voltage devices, 1.8V chip support through low voltage adapter.

Less then 2 seconds per Mbit Programming speed for high density flash chip.

No adapter required for DIL chip up to 48-pin

48-pin universal pin driver and current limit

Auto-sense/ Self programming with statistical report

Device insertion /continuity check

Universal adapter for 44-pin PLCC/ QFP/ TQFP/PSOP and 40/48 TSOP

Supports OS : Windows 95/98/ME/2000, windows XP and NT (Parallel port)
Windows 98SE/ME/2000, windows XP (USB port)

Automatic EPROM/ Flash ID search

Serialization for Memory/μP chip

Memory buffer H / L byte swap

Project file save / load function

User-selectable verify Vcc with one or two-pass verify voltage

Automatic file format detection and conversion

User-changeable programming parameters

1 years warranty

Software update via web

Auto-sense, self-start with standard/semi-concurrent mode

Independent modules allow flexible configuration

Universal adapters for 48TSOP/44PSOP/40TSOP Flash chips support

Customized MCU support

Device insertion and continuity test

Project file save/load function

USB or parallel port interface with auto-switch power supply

Supports OS : Windows 95/98/ME/2000, windows XP and NT (Parallel port)
Windows 98SE/ME/2000, windows XP (USB port)

Software update via Internet

Optional handler interface